Plywood Production Line Heating Press Machine For Drying and
Flatting the Veneer
Adopt automatic device for controlling of close and open of the
press platens. Adopt solid steel heat conduction board with
deep-hole drilling technic, configure with pedal emergency switch
1. Hydraulic station can be heated by steam boiler, oil heater or
electric oil heater.
2. The steam boiler is low in cost and suitable for common
production, yet it is high pressure vessels, so it should be
Hydraulic hot press machine for doors particle board hot press
1. Hot press can be used to make the structure of plywood steady,
and also remove the excess moisture of glue.
2. The hydraulic system and electrical system have been equipped
with. If customer need, we also can supply the Automatic infeed and
out feed device for this machine.
3. All platens have been treated specially, the smooth surface
ensure the smooth degree of final plywood.
4. The user can choose the heating system as heat steam or thermal
oil, but the hot press machine we offered does not include boiler.
5. The cylinders have been treated in high accuracy, so it can
avoid oil leaking.
6. For some special needs of our customer, we also can do the hot
press machine with assistant lifting cylinder.
|Technical Specifications||16 Layers|
|Press platen dimensions||(mm)||1400x800x42|
|Pressure of hydraulic system||(kg/cm²)||22.3|
|Oil cylinder||φ280mm * 2pcs|
|Hydraulic motor power||(kw)||7.5|
|Hot oil pump power||(kw)||2.2|
|Heating pipe power||(kw)||36|
More details of the machine: