Laminate Lumber Wide Belt Sander Machine Double Sanding Belt With
Morking WIdth 1280mm
Features of Wood sanding machine:
Double sanding belt, one time sanding, no need change sanding belt.
Working speed stepless adjusting, easy to adjust and save power.
The machine have an adequate support system to support a long
profile during sending process.
The machine equipped with suitable thickness indicator for easy
process of difference profiles thickness.
R-RP model: The first roller is steel roller; the second unit is
85°rubber roller with air sanding pad. RP-P model: The first unit
is rubber roller with sanding pad; the second unit is air sanding
Steel roller is for calibration sanding and rubber roller is for
The pressing roller protects device to keep the board on the
feeding table, which keep the operators safe.
Safety Protection: Assure with good performance under safety
Heavy-duty Frame: Cast steel girder, base and front plate,
Speed control: Sanding belt rotational speed and feeding speed, to
ensure working perfectly.
Easy replaced sanding belt.
Easy operation with control panel.
Dust collector: Air blowers and dust collector can wipe off the
dust of the work pieces.
Max. working width: 1280mm
Working thickness: 1450mm
Front standing belt speed: 26m/sec
After sanding belt speed: 19m/sec
Feed speed: 5-23m/min
Sanding belt size: 1300x2350mm
Gross power of motor: 56.37kw
First motor: 30kw
Second motor: 22kw
Lifting motor: 0.37kw
Feeding motor: 4kw
Working air pressure: 0.6mpa