Wood Door Wide Belt Sander Machine Double Sanding Belt With Feeding
Safety Protection: Assure with good performance under safety
Heavy-duty Frame: Cast steel girder, base and front plate,
Speed control: Sanding belt rotational speed and feeding speed, to
ensure working perfectly.
Easy replaced sanding belt.
Easy operation with control panel.
Dust collector: Air blowers and dust collector can wipe off the
dust of the work pieces.
Double sanding belt, one time sanding, no need change sanding belt.
Working speed stepless adjusting, easy to adjust and save power.
The machine have an adequate support system to support a long
profile during sending process.
The machine equipped with suitable thickness indicator for easy
process of difference profiles thickness.
Wide Belt sanding Function and Characteristics:
(1) It is suitable for calibrating and fine sanding laminate
lumber, composite board, particle board, solid wood, panel
furniture, bamboo floor, wood door and etc. It is one of the
necessary equipment for integrated wood and furniture
(2) R-RP model: The first roller is steel roller; the second unit
is 85°rubber roller with air sanding pad. RP-P model: The first
unit is rubber roller with sanding pad; the second unit is air
Steel roller is for calibration sanding and rubber roller is for
(3) The pressing roller protects device to keep the board on the
feeding table, which keep the operators safe.
Max. working width: 610mm
Working thickness: 150mm
Front standing belt speed: 21m/sec
After sanding belt speed: 17.2m/sec
Feed speed: 5-23m/min
Sanding belt size: 630X1930mm
Gross power of motor: 20.37kw
First motor: 11kw
Second motor: 7.5kw
Lifting motor: 0.37kw
Feeding motor: 1.5kw
Working air pressure: 0.6mpa