Working Thickness 40mm Wide Belt Sanding Machine With Working Width
Features of Wood sanding machine:
1. Double sanding belt, one time sanding, no need change sanding
2. Working speed stepless adjusting, easy to adjust and save power.
3. The machine have an adequate support system to support a long
profile during sending process.
4. The machine equipped with suitable thickness indicator for easy
process of difference profiles thickness.
Function and Characteristics:
1. It is suitable for calibrating and fine sanding laminate lumber,
composite board, particle board, solid wood, panel furniture,
bamboo floor, wood door and etc. It is one of the necessary
equipment for integrated wood and furniture manufacturing.
2. R-RP model: The first roller is steel roller; the second unit is
85°rubber roller with air sanding pad. RP-P model: The first unit
is rubber roller with sanding pad; the second unit is air sanding
Steel roller is for calibration sanding and rubber roller is for
3. The pressing roller protects device to keep the board on the
feeding table, which keep the operators safe.
4. Safety Protection: Assure with good performance under safety
5. Heavy-duty Frame: Cast steel girder, base and front plate,
6. Speed control: Sanding belt rotational speed and feeding speed,
to ensure working perfectly.
7. Easy replaced sanding belt.
8. Easy operation with control panel.
9. Dust collector: Air blowers and dust collector can wipe off the
dust of the work pieces.
Max. working width: 380mm
Working thickness: 40mm
After sanding belt speed: 20m/sec
Feed speed: 5-19m/min
Sanding belt size: 400x1380mm
Gross power of motor: 17.25kw
First motor: 7.5kw
Second motor: 7.5kw
Lifting motor: 0.75kw
Feeding motor: 1.5kw
Working air pressure: 0.6mpa