Stairs Handguard Four-side Moulder Machine With Operating Platform
Professional Solution: wooden floors, door frames, stairs
handguard, wooden, various wood lines and the big cutting quantity
The spindle uses the independent operation, shearing force is
Adopting frequency control, feeding speed reaches 5-28 meters.
The spindle can be up and down and move around to facilitate the
various shapes processing of wood line.
The plating workbench is smooth and wearable.
Spindle sdjustment is concentrated in the front, easy to operate.
Epuipped with a short feeding device, it is effectively to improve
the utilization of short-material processing.
Fully enclosed protective cover to avoid sawdust flying and noise
isolation, it plays a role in security protection.
Pneumatic pressure feed wheel which can divide adjustment pressure,
it is advantageous in the adjustment pressure of different
thickness wood to ensure smooth feeding.
Working Width: 25-200mm
Working Thickness: 8-120mm
Operating Platform Length: 1800mm
Feeding Speed: 5-38m/min
Spindle Diameter: 40mm
Spindle Speed: 6000r/min
Gas Source Pressure: 0.6Mpa
First Bottom Spindle: 5.5kw/7.5Hp
First Top Spindle: 7.5kw/10Hp
Right Side Spindle: 5.5kw/7.5Hp
Left Side Spindle: 5.5kw/7.5Hp
Second Top Spindle: 5.5kw/7.5Hp
Second Bottom Spindle: 5.5kw/7.5Hp
Feed Beam Rise & Fal: 0.75kw/1Hp
Total Motor Power: 39.75kw
Right Side Spindle: 125-180mm
Left Side Spindle: 125-180mm
First Bottom Spindle: 125mm
First Top Spindle: 125-180mm
Second Top Spindle: 125-180mm
Second Bottom Spindle: 125-180mm
Feeding Wheel Diameter: 140mm
Dust Absorption Tube Diameter: 140mm
Overall Dimensions: 3920x1600x1700mm